9/16 CARL HERZOG 'WIENER SHABERL' - shave ready

Description

(12) Manufactured early 1900's. Back of blade almost straight with round point and no shoulder. Blade measures approximately 2 ¾ X 9/16. On one side of shank "WIENER SCHABERL", on other side "CARL HERZOG - STUTTGART- 47". Blade cleaned, polished and honed shave ready. Two spots of deep pitting near spine. Very light pitting here and there. Jimp's bottom of the shank. Hard rubber scales sanded and polished with new brass pivot pin and washers. Four grooves cut in scales at pivot pin filled with superglue.
Light coat of oil for protection on blade. Please look at photos as they are best description.
Honing: One layer of electrical tape on spine. Bevel set on 600 grit diamond hone. Then 6000 water stone and finished on 20,000 Jasper. Then stroped on canvas with diamond paste and then leather and disinfected. A .00 VALUE FREE.
I personally test shave each razor before final disinfection. Shave ready is different to each person. Factors like light or coarse beard or beard length come into play. I have a heavy beard and test shave every razor on a two day growth. If razor gives a close comfortable shave I call it shave ready. If it does not shave right I re-hone the razor.
Payment due in three days.
Thank you