Electric Cup Sealing Machine Cup Sealer Cafe Tea Sealing Machine Commercial 110V

Description

Description：
☆ Made of heavy duty and durable stainless steel structure.
☆
Auto cup-relocation function for convenient use.
☆
High sensitive scaner for precise sealing to save bubble films.
☆
Indicator lights for safe and convenient operation ,seal automatically in seconds.
☆
Good for sealing cup beverage, boba milk tea, ice and hot coffee, smoothie, etc.
Operating steps：(Note:This Sealer only support 110V)
1. Plug in the machine. turn on the switch of power and choose the specified temperature, the green lamp will be on in the mean time, which means the heating tube is working. When the lamp turn to yellow, it means the setting temperature was reached. Then constant temperature device makes sure the temperature inside the case is within the designated level by stopping and restarting the heating tubes' working circularly.
2. Set the cup in the lower mould and push it to the prescribed place. And press the handle downward to the maximum extent possible and keep 1-2 seconds. Moving slowly up the handle and returns to the normal position. Otherwise, the machine can't work normally if it is not reach the prescribed place. Because there has fixed pin to avoid the damage of serrated knife.
3. Pull the cup out of the lower mould and repeat the action's of step 2.
4. Each time you sealed the cup, the calculator will be accumulated in the mean time. The way of resetting of calculator is that pressing the reset button of the right side of calculator anticlockwise until the number turns to "0".
Attentions:
1. The appliance must be connected with qualified ground wire.
2. The actual voltage should be the same as or within the range of 5% on either side of voltage marked on the parameter sticker.
3. The upper mould must be aim at the lower mould before pressing the handle and do not overexert when use.
4. Never put your hand into the machine when it working.
Cleaning and maintaining:
1.Before cleaning, cut off the electricity and please use dry cloth to clean the surface of machine, bottom of plate and fixed axle.
2.Please put grease on the bearings and moving parts of the machine to make it turn more easily.
3.The way of cleaning serrated knife: please plug up the leak on the lower mould and pour boiling water into the mould. Then push it to the prescribed place, press the handle downward to the maximum extent possible and keep for a few minutes,repeat the action circularly.
Parameter：
Model：WY-802F
Voltage：110V
Power：270-320W
Size(cm)：27X27X65
Output：300- 500cup/h
Package Included:
1 x Sealing Machine
Any problem, please contact us first, we will help you solve it soon.Thanks!