EPDM Rubber SEAMLESS Roofing Kit COMPLETE - 1,600 sq.ft. BY THE LOTTES COMPANIES

Description

Lottes Roofing
126 Point West Blvd
St. Charles, MO 63303
"More than 30 years of experience in single ply flat roofing products"
Most Orders Ship from Our Distribution Center in St. Charles, Missouri.
Professional Rubber Roof: Complete Installation Kit - 1,600 sq.ft.
First Rate Materials - Black 45Mil EPDM Rubber & Latex Bonding Adhesive
Quality Products - Includes ADHESIVE AND T-Bars
FREE SHIPPING 48 States
Included Items
1,600  sq ft. of 45 mil black EPDM, a SEAMLESS sheet 40' x 40'
4 count 4 Gallon Pails Latex Bonding Adhesive
16 count 10' x 1" Aluminum T-bars
·
1
Clean the roof surface of all debris and nails. Re-fasten any loose roof boards.
·
2
Fill any gaps larger than 3/8” inch with wooden strips. The EPDM cannot span gaps of more than 3/8" without risk of possible adhesion issues.
·
3
Start at the bottom of the roof and roll out the EPDM from one side of the roof to the other and let it sit for 10-15 minutes. Fold bottom half of the membrane onto the top half of the in place membrane
·
4
Apply the bonding adhesive to the exposed roof deck and NOT to the EPDM membrane as the adhesive is to be applied as a one surface WET LAMINATE using a notched trowel to spread the adhesive in a pattern over the decking. Slowly fold the EPDM roofing membrane back into place while the adhesive is still wet. To ensure adhesive transfer and a good bond, use a stiff bristled push broom and force the membrane into contact with the adhesive on the roof deck. Repeat the process on the other half of the EPDM membrane.
·
5
Roll out the next piece of membrane, allowing a four to six inch overlap on the piece below it. This overlap is crucial to allow enough overlap between the two pieces and to allow the water to flow from the upper part of the roof down to the roof edge. This is also to allow enough room to apply the primer and 3” seam tape if required to splice 2 pieces of EPDM deck sheet together.
·
6
Adhere this section in the same manner as the first section. Continue adding sections until you have covered your roof.
This Product is a Professional Grade EPDM Rubber Roof Installation Kit.
Flashing detail, seam flaps, & roof penetrations will determine actual roof coverage.  Please allow for these adjustments when purchasing materials.
Summary of Lottes Roofing Store Policies
Payment
All Credit Cards, Company Certified Checks, Bank Checks, Bank Wire, Paypal
Fees
No sales taxes except in applicable states
Shipping
US and International
Delivery
24-48 hours to SHIP most in stock items, not counting weekends or holidays. Time tables will vary depending on the items ordered.
Refunds & Returns
Returns accepted on qualified items with RGA return number
Contact Us
SHOP WITH CONFIDENCE
Powered by
eBay Turbo Lister
The free listing tool. List your items fast and easy and manage your active items.
Just a note. FREE shipping is ONLY to the lower US 48 states. All other locations will have additional freight, fees, and charges as well as any and all International customs and duties as applicable.
Contact us for Volume Discounts
Buy 3 items get 5% EXTRA Discount off items pricing
Buy 5 items get 8% EXTRA Discount off items pricing
We currently only ship to the lower 48 sates, not Alaska or Hawaii